Aquaristik seit 1995!
Support   Hotline: +49 (0) 5722 88 88 620

Pacific Sun LED

Gitter Liste

In absteigender Reihenfolge

19 Artikel

Gitter Liste

In absteigender Reihenfolge

19 Artikel

GHL module and Pacific Sun units

The module is very easy to configure and to operate – in principal, it is a voltage converter 1-10V for the PWM signal received by the lamps.

Following Pacific Sun lamps are compatible with GHL Profilux:

- Black Python Slave - models CRP(110W, 160W, 200W) and XM 140W
- Metis - models CRP, XM, Hyperion (850mm, 1250mm,1650mm)
- Pandora - models XM, Hyperion(1250mm, 1650mm)
- Galileo

The description is based on the Profilux II computer, however the complete range of profiLux controllers is capable of this control including the Light II
First of all, let me explain how to connect a single lamp, Slave type, 160W CRP. Every set with the module contains extra transmission cable and CD.

connect the module to the computer (sockets L1, L2 and L3, L4). It is vital that you put the cables in the right order – if you put the first cable in
the first socket from the left in the computer, you should put the other end of the same cable in the first socket from the left in the controller.



The same applies to the second cable – second socket in the computer, second socket in the controller.

Connect the transmission cable Slave – GHL (included in the set) – to the first port from the left of the Slave lamp – this is the input port of lamp controlling signal

If you have more than one Slave lamp, connect each lamp as described: first Slave output (with DSC cable on the picture) to the first port from the left of each lamp

This is so called Mono-light connection, which ensures that all the lamps have the same power, colour temperature, sunrise/sunset time etc.
You can also connect the lamps through Dual-light connection (this will be explained later).
Define the required power, switch on time, sunrise/sunset length separately for each channel through your Profilux computer.
You can also configure some special features, like overcast, lightings (storms), rainy days etc.
Channel functions in Profilux computer:
L1 – white channel
L2 – blue channel
L3 – moonlight channel
L4 – not used in BP/Metis lamps

All the channels in Profilux can be defined separately. You can set various switch on times, powers etc – the PAR board provides
The Profilux computer enables 32 channels of 1-10V – it can be extended through connection of up to 8 subsequent modules
you with the same light simulations, as you get using Master lamp computer. You do not need STDL list; the module provides all

the necessary controls. You can also connect your PS lamps (like Black Python) in Dual-light mode. In this mode you can connect
Profilux computer with up to 8 Slave lamps and you can define advanced light simulating programs for each separate lamp.
PLM -4L. As each lamp requires one module, you can connect up to 8 lamps. Thus, in case of long tanks, you can simulate light
movement from left to right, changeable overcast, movement of the moon and random lightings (occurring at different time in
each lamp).

Illumination programs

1. Clouds
Profilux provides simulation of randomly passing clouds (individual lamps dims for define or random period of time) – it gives the
impression of partial overcastting of certain areas of the tank by passing clouds. You can preset the probability of overcast,
maximum overcast (minimal power of “overcast” lamp), the length of the overcast period and the length of passing clouds.

2. Rainy days
This option will dim the light intensity for the day (you can also preset the colour temperature) – this feature is useful if you try
to get rid of unwanted algae e.g. from the bottom of your tank). This option decreases the intensity of light throughout the
whole day whereas with the “Clouds” option, the light is dimmed for selected periods of time.

3. Storms
You can configure the probability and length of lightings, lightening power (high, low) and maximum number of storms per day.
You can define one day per week as a “storm day” or chose the option of random storms by defining the minimal interval
between storms. These are the main options provided by Profilux computer with adjacent LED lamps.

For bigger tanks, with more than 3 LED lamps, we recommend using Dual-light connections. In smaller tanks, lamps working in
the Mono-light mode can successfully perform all the simulations, although you can chose the Dual-light mode to connect
even 2 lamps.